Search for: All records

We describe the design, construction, and operation of an apparatus that utilizes a piezoelectric transducer for in-vacuum loading of nanoparticles into an optical trap for use in levitated optomechanics experiments. In contrast to commonly used nebulizer-based trap-loading methods that generate aerosolized liquid droplets containing nanoparticles, the method produces dry aerosols of both spherical and high-aspect ratio particles ranging in size by approximately two orders of magnitude. The device has been shown to generate accelerations of order 107 g, which is sufficient to overcome stiction forces between glass nanoparticles and a glass substrate for particles as small as 170 nm in diameter. Particles with sizes ranging from 170 nm to ∼10μm have been successfully loaded into optical traps at pressures ranging from 1 bar to 0.6 mbar. We report the velocity distribution of the particles launched from the substrate, and our results indicate promise for direct loading into ultra-high-vacuum with sufficient laser feedback cooling. This loading technique could be useful for the development of compact fieldable sensors based on optically levitated nanoparticles as well as matter–wave interference experiments with ultra-cold nano-objects, which rely on multiple repeated free-fall measurements and thus require rapid trap re-loading in high vacuum conditions.

 

The center-of-mass motion of optically trapped dielectric nanoparticles in a vacuum is extremely well decoupled from its environment, making a powerful tool for measurements of feeble subattonewton forces. We demonstrate a method to trap and maneuver nanoparticles in an optical standing wave potential formed by retroreflecting a laser beam from a metallic mirror surface. We can reliably position a ∼ 170 n m diameter silica nanoparticle at distances of a few hundred nanometers to tens of micrometers from the surface of a gold-coated silicon mirror by transferring it from a single-beam tweezer trap into the standing wave potential. We can further measure forces experienced by the particle while scanning the two-dimensional space parallel to the mirror surface, and we find no significant excess force noise in the vicinity of the surface. This method may enable three-dimensional scanning force sensing near surfaces using optically trapped nanoparticles, promising for high-sensitivity scanning force microscopy, tests of the Casimir effect, and tests of the gravitational inverse square law at micrometer scales. 

We discuss the use of optical cavities as tools to search for dark matter (DM) composed of virialized ultralight fields (VULFs). Such fields could lead to oscillating fundamental constants, resulting in oscillations of the length of rigid bodies. We propose searching for these effects via differential strain measurement of rigid and suspended-mirror cavities. We estimate that more than 2 orders of magnitude of unexplored phase space for VULF DM couplings can be probed at VULF Compton frequencies in the audible range of 0.1–10 kHz. 

The objective of the proposed macroscopic quantum resonators (MAQRO) mission is to harness space for achieving long free-fall times, extreme vacuum, nano-gravity, and cryogenic temperatures to test the foundations of physics in macroscopic quantum experiments at the interface with gravity. Developing the necessary technologies, achieving the required sensitivities and providing the necessary isolation of macroscopic quantum systems from their environment will lay the path for developing novel quantum sensors. Earlier studies showed that the proposal is feasible but that several critical challenges remain, and key technologies need to be developed. Recent scientific and technological developments since the original proposal of MAQRO promise the potential for achieving additional science objectives. The proposed research campaign aims to advance the state of the art and to perform the first macroscopic quantum experiments in space. Experiments on the ground, in micro-gravity, and in space will drive the proposed research campaign during the current decade to enable the implementation of MAQRO within the subsequent decade.